SafeAir Duct & Chimney BBB Business Review
Protecting Homes.Building Trust.

Chimney Crown & Flashing Repair in Bedford, TX

Most of the chimney work we do in Bedford starts at the top: cracked crowns, failed flashing and missing caps that let water into the brick. SafeAir Duct & Chimney repairs crowns and flashing, installs caps and cleans chimneys across Bedford. We inspect first, send you photos of what we find, and give you a written estimate before any work starts.

SafeAir technician repairing brick chimney crown on rooftop in Denton TX

Chimney Crown, Flashing and Cap Services in Bedford

These are the services Bedford homeowners book with us most.

Chimney Crown Repair

The crown is the concrete slab on top of a masonry chimney. Once it cracks, water runs into the brick every time it rains. We repair cracked crowns and replace crowns that are too far gone.

Flashing Repair and Waterproofing

Flashing is the metal seal where the chimney meets the roof. We repair and reseal it, replace flashing and counter flashing when needed, and waterproof the chimney.

Masonry Repair and Caps

We repoint worn mortar joints, restore brick fireplaces, treat rusted dampers and install custom chimney caps that keep out rain and animals.

Chimney Cleaning and Failed Inspections

A basic chimney cleaning with a full inspection is $99. When a chimney fails an inspection, we fix the cause, usually heavy creosote or a damaged firebox panel, and show you photos of the result.

How a Bedford Chimney Repair Works

  1. Book: call (214) 550-3348 or book online and tell us what you see, such as a water stain near the fireplace or crumbling mortar.
  2. Inspect: a chimney inspection is $49. We go on the roof and into the firebox and photograph the crown, flashing, cap, flue and damper.
  3. Estimate: you get the photos and a written estimate. Nothing starts until you approve it.
  4. Repair: our crew completes the work and shows you the finished result.

Recent Projects in Bedford

A few recent chimney projects from Bedford homes.

Flashing and counter flashing replaced

We replaced the flashing and counter flashing, repointed the mortar, installed a custom cap and deep cleaned the chimney.

Dead animal behind the liner

An odor led us to an animal that had died behind the chimney liner. We took the liner out, removed it, reinstalled the system and added a custom cap.

New crown and repointing

We built a new chimney crown, repointed the mortar, sealed the flashing and deep cleaned the chimney.

Two chimneys that failed inspection

We brought two chimneys back with deep cleaning and creosote treatment, one with a wasp treatment and screen.

Why Bedford Homeowners Choose SafeAir

  • We fix where the water gets in, not only the stain inside.
  • Photos and a written estimate before any work begins.
  • A $49 chimney inspection and a $99 basic chimney cleaning with a full inspection.
  • CSIA-certified technicians.
  • Family owned, licensed and insured, and a BBB Accredited Business.
  • Read SafeAir Duct & Chimney reviews from homeowners on Google, Yelp, the BBB and Facebook.

Where We Work in Bedford

We work across Bedford in the 76021 and 76022 ZIP codes, north and south of Highway 183. We also serve nearby Euless, Hurst, North Richland Hills and Grapevine.

Book Chimney Crown or Flashing Repair in Bedford

Call (214) 550-3348 or request a quote online. We will inspect the chimney, show you the photos and give you a written price before any work starts.

Frequently Asked Questions

How do I know if my chimney crown is cracked?
You usually cannot see it from the ground. Signs include water stains near the fireplace, a rusted damper and crumbling brick near the top. An inspection with photos will show it.
What is chimney flashing?
Flashing is the metal seal where the chimney meets the roof. When it lifts or the sealant fails, rain runs down into the attic and the walls around the fireplace.
How much is a chimney inspection in Bedford?
A chimney inspection is $49. We check the crown, flashing, cap, flue, damper and firebox and send you photos.
My chimney failed inspection. Can it be fixed?
Usually, yes. The most common causes are heavy creosote, worn mortar and cracked firebox panels. We fix the cause and send you photos of the result.
There is a bad smell coming from my fireplace. What could it be?
Common causes are creosote, moisture or an animal that died in the chimney. We find the source and remove it, then add a cap so it does not happen again.
Do you install chimney caps in Bedford?
Yes. We install standard and custom chimney caps that keep out rain, birds and squirrels.
SafeAir Duct & Chimney BBB Business Review
Company
Business Hours
Return Policy
Terms and Conditions
About Us
Payment Methods
Information
Work Hours
Terms and Conditions
Business Hours
Copyright Notice
About Us
Contact Info
Call Now - (214)550-3348